The KEOL-TANK is intended to receive the product to be dosed in order to pressurize it and thus supply a dosing valve.
Manufactured in stainless steel, it allows the clean storage of liquids so as not to degrade their properties over time. The capacities are adapted to reduce the frequency of filling. Possibility to put the original container.
|Reference||Capacity||Air pressure |
|Inner diameter (mm)||Technical datasheet|
|KEOL-TANK 20L||20 L||Less than 5 bar||258|
|KEOL-TANK 10L||10 L||Less than 5 bar||258|
|KEOL-TANK 5L||5 L||Less than 5 bar||195|
|KEOL-TANK 3L||3 L||Less than 5 bar||133|
The empty drums is a solution for pumping resin and glues from 20 and 200 liter barrels.
The empty drums is used both in one-component and two-component for products of medium to high viscosity, up to 2,000,000 mPas. Suitable for all common glues and resins, for viscosities over 40,000 mPa.s: Polyurethanes, Epoxy, Silicones and Methacrylate.
|KEOL-VF 200L||200 L||400 bars||25 L / min|
|KEOL-VF 20L||20 L||400 bars||8 L / min|
Cartridge shooters are pneumatic systems which allow the glue to be extracted from their original packaging, by exerting pressure on the piston thereof. They are suitable for 310 mL, 600 mL one-component and 50 mL, 200 mL, 400 mL, 490 mL two-component cartridges.
|Reference||Cartridge type||System||Manometer||Available ratio||Technical datasheet|
|KEOL-MAT PC 490 MECA||sTwo-components||Cylinder||0 - 6 bar (2 manometers)||490 ml cartridge|
|KEOL-MAT PC 900 MECA||Single component||Cylinder||0 – 6 bar||900 mL cartridge|
|KEOL-MAT PC 900 AIR||Single component||Pneumatic||900 mL cartridge|
|KEOL-MAT PC 600 MECA||Single component||Cylinder||0 – 6 bar||600 mL cartridge|
*Option: limit switch detector on the entire range of cartridge pusher